1.Regular Maintenance:
To ensure the smooth operation of the engraving machine, it is recommended to clean up the debris and impurities on the guide rails every two months.
2. Use a Brush for Cleaning:
Use a soft brush to gently brush away the attached debris and impurities along the trajectory of the guide rails and wheels.
3.Clean the Wheels:
At the same time, pay attention to cleaning the debris on the guide rail wheels to ensure smooth rolling and extend the service life of the wheels.
4. Use Compressed Air:
If there are chips or dust that are difficult to remove with a brush, compressed air can be used to blow away the impurities in the gaps between the guide rails and wheels.
5. Safety Operation:
When cleaning, make sure the machine is turned off and disconnected from the power supply to prevent accidents during the cleaning process.
6. Check Guide Rail Lubrication:
-After cleaning, check the lubrication condition of the guide rails and replenish lubricating oil if necessary to reduce friction and maintain the smooth operation of the machine.
7. Regular Inspection:
In addition to regular cleaning, regularly inspect the wear of the guide rails and wheels, and replace parts that are severely worn in a timely manner.
