¶ Installation of the 1064 Laser Head on the TTS Model
1.After removing the original laser head, take off the back panel and install it on the 1064 laser head to secure it in place.
2.After installing the 1064 laser head on the X-axis carriage, remove the mainboard box and open the back panel.
3.Connect the white port of the matching laser cable to the 12V and TTL interface on the motherboard.
4.Reinstall the mainboard box onto the machine, connect the other end of the laser cable to the 1064 laser head, and then secure the laser cable with cable ties on the cable sleeve.
