¶ How to Install driver on computer?
- The TF card attached by the manufacturer.
Search: CH340SER - Open the LaserGRBL software on your computer
The ”Tools” menu of the LaserGRBL software.
- Note: Install the driver unsuccessfully will cause the computer to fail to connect to the machine
¶ Software installation
How to install LaserGRBL?
LaserGRBL For Windows
http://lasergrbl.com/download/
(The installation package is also available on the TF card from the manufacturer)
How to install LightBurn?
LightBurn For Windows, MAC
LightBurn is a paid software, only 30 days for free.
https://lightburnsoftware.com/
(The installation package is also available on the TF card from the manufacturer)
¶ "How does the software connect to the machine
¶ LESER GRBL
- Power on the machine.
- Connect the machine to the computer with a USB cable.
- Open the LaserGRBL software.
- In the COM checkbox, select the machine’s COM number. (Usually not COM1)
- In the Baud checkbox, select 115200.
- Click the “Connect” button to establish the connection successfully.
|
¶ LIGHTBURN
1.After installing the CH340 driver, open the LightBurn software (which has been activated) and select to create manually.
2.Select “GRBL,” then proceed to the next step and choose "Serial/USB.”
3.Enter the machine name and enter the machine’s working travel distance.
|
4.Set the origin: Front left corner, disable the automatic “Origin,” then proceed to the next step.
|
¶ Connecting to WIFI and using APP mode.
¶ Wi-Fi Mode
（Preparation: Install the CH340 serial port, and connect the machine to the computer with a connecting cable.）
1.After installing the laser control software, open it and select the WIFI connection tool.
2.Select the correct COM port, search for the WIFI network, enter the password, and then connect to the WIFI.
3.Connected successfully and obtained the IP address.
¶ Connect to the APP for use.
（Preparation: Install the MKSLase software.）
1.Open the APP software, select the connection option, and enter the IP to start connecting.
2.After opening the control page, set the origin point and insert the TF card into the machine: Note (TF card must be inserted to use).
3.Select the file to upload for engraving.
