¶ Connecting to WIFI and using APP mode.
¶ Wi-Fi Mode
（Preparation: Install the CH340 serial port, and connect the machine to the computer with a connecting cable.）
1.After installing the laser control software, open it and select the WIFI connection tool.
2.Select the correct COM port, search for the WIFI network, enter the password, and then connect to the WIFI.
3.Connected successfully and obtained the IP address.
¶ Connect to the APP for use.
（Preparation: Install the MKSLase software.）
1.Open the APP software, select the connection option, and enter the IP to start connecting.
2.After opening the control page, set the origin point and insert the TF card into the machine: Note (TF card must be inserted to use).
3.Select the file to upload for engraving.
