¶ Cleaning the laser head lens
1. The Importance of Regular Cleaning: Given the high frequency of use for the machine, it is recommended to clean the laser head lens regularly to maintain laser quality and equipment performance
2.Choosing the Right Cleaning Agent: Use alcohol or other specialized optical cleaning solutions to gently wipe the laser head lens, removing dust, grease, and other impurities.
3. Safety Operation: Before cleaning the lens, make sure the machine is completely disconnected from the power supply to avoid the risk of electric shock and damage to the machine.
4. Cleaning Steps: Use non-woven cloth or special wiping paper with an appropriate amount of cleaning agent to gently wipe the lens, avoiding excessive force to prevent scratching the lens.
5. Waiting to Dry: After cleaning, let the lens air dry or use clean air to blow it dry, and ensure the lens is completely dry before restarting the machine.
6. Precautions: During the cleaning process, avoid using any cleaning materials that may leave residues or cause chemical reactions.
7. Inspection Before Reuse: Before resuming use of the machine, check whether the lens is completely clean and dry, ensuring no cleaning agent residue remains.
¶ Machine guide rails
1.Regular Maintenance: To ensure the smooth operation of the engraving machine, it is recommended to clean up the debris and impurities on the guide rails every two months.
2. Use a Brush for Cleaning: Use a soft brush to gently brush away the attached debris and impurities along the trajectory of the guide rails and wheels.
3.Clean the Wheels: At the same time, pay attention to cleaning the debris on the guide rail wheels to ensure smooth rolling and extend the service life of the wheels.
4. Use Compressed Air: If there are chips or dust that are difficult to remove with a brush, compressed air can be used to blow away the impurities in the gaps between the guide rails and wheels.
5. Safety Operation: When cleaning, make sure the machine is turned off and disconnected from the power supply to prevent accidents during the cleaning process.
6. Check Guide Rail Lubrication: -After cleaning, check the lubrication condition of the guide rails and replenish lubricating oil if necessary to reduce friction and maintain the smooth operation of the machine.
7. Regular Inspection: In addition to regular cleaning, regularly inspect the wear of the guide rails and wheels, and replace parts that are severely worn in a timely manner.
¶ Z-axis lead screw
1.Regular Maintenance: To maintain the machine’s precision and extend its service life, it is recommended to clean and maintain the lead screws every two months。
2. Clean the Lead Screws: Firstly, use a soft brush or clean cloth to carefully remove the debris and impurities attached to the lead screws.
3. Lubricate the Lead Screws: After cleaning, apply an appropriate amount of lubricating grease evenly on the lead screws to form a thin layer of lubrication.
4. Evenly Apply Lubricating Grease: Manually rotate the Z-axis hand nut up and down to ensure the grease is evenly distributed along the lead screws by moving the nut back and forth.
5. Safety Operation: When performing maintenance tasks, ensure the machine is turned off and disconnected from the power supply to prevent electric shock or equipment damage.
6. Check Lead Screw Tightness: During maintenance, also check the tightness of the lead screws to ensure there is no looseness, maintaining the stability of the machine.
7. Pay Attention to the Choice of Lubricating Grease: Select lubricating grease suitable for the machine’s operating environment and working conditions to ensure the best lubricating effect.
8. Post-Maintenance Testing: After maintenance is complete, restart the machine and conduct a short test run to ensure smooth motion of the lead screws and the performance of the machine.
