¶ How to install drivers on a computer?
- The TF card attached by the manufacturer.
Search: CH340SER - Open the LaserGRBL software on your computer
The ”Tools” menu of the LaserGRBL software.
- Note: Install the driver unsuccessfully will cause the computer to fail to connect to the machine
。
¶ How to install LaserGRBL?
LaserGRBL for Windows
(Installation kit is also provided on the manufacturer’s TF card)
¶ How do I install LightBurn？
LightBurn is available for Windows, MAC
LightBurn is a paid app that is only free for 30 days.
(Installation kit is also provided on the manufacturer’s TF card)
¶ How do I connect a machine to a computer？
LESER GRBL
- Turn on the machine.
- Connect the machine to the computer with a USB cable.
- Open the LaserGRBL software
In the COM check box, select the COM number for the machine. (Usually not COM1)
In the Baud check box, select 115200.
Click the “Connect” button, the connection is successful.
|
LIGHTBURN
LightBurn Link tutorial
LightBurn Software Sculpting Tutorial
1.After installing the CH340 driver, open LightBurn software (activated) and select Create manually
2.Select GRBL and select Serial/USB in the next step”
3.Enter the name of the machine, and enter the working travel of the machine
|
4.Set origin: Front left, turn off automatic “origin”, next
|
¶ Connect APP mode
Follow the diagram below to connect the engraving
|
|
|
|
|
|