¶ Assembly tutorial
¶ Install on TTC450Pro
1.Open the motor cover first, then unplug the motor wires and remove the 775 motor.
2.After removing the back panel, disassemble the clamps.
3.Dismantle the trimming machine’s accessory clamps, install the clamp base, and then lock the fasteners.
4.Place the trimming machine into the clamps and secure it tightly, then take out the adapter and connect the aviation plug.
5.After connecting the adapter to the power source, connect the control wire to the 24V port located below the screen.
¶ Install on TTC450
Install the extension cable provided in the kit onto the control wire, and then connect it to the input line of the spindle.
