¶ Assembly tutorial
¶ Install on the 775 spindle.
1.Remove the tool head cover and install the spindle (it may be easier to take off the clamp along with the spindle for installation), which requires two screws.
2.Remove the brush cover and install the brush, then snap the base cover back into place.
3.Open the vacuum cleaner’s top cover and remove the hose and storage bag.
4.Open the vacuum cleaner’s top cover and remove the hose and storage bag.
5.Attach one end of the hose to the vacuum cleaner, and the other end to the tool head.
6.Connect the USB cable to the vacuum cleaner, secure the cable along the hose with a cable tie, and plug the other end into the tool head.
7.Connect the vacuum cleaner to the power source.
8.Turn on the automatic vacuuming function.
|
9.Turn on the LED light.
|
10.Manual activation.
|
¶ Install on the 500W spindle.
1.Install on the 500W spindle with a slight difference; the clamp along with the spindle can be removed for installation, requiring four screws.
