¶ Installed on TTC450
1.Unplug the motor wire of 775 and remove the fixture
2.Install the 500W spindle base and fixture, and install the 500W spindle motor
3.Connect the aviation plug and power supply to the governor, and then connect the conversion cable at the other end of the aviation plug
¶ TTC450Pro installed
1.First remove the 775 motor line, and then remove the original fixture after removing the milling cutter
2.Remove the backplane, install the 500 spindle base, and then install the fixture
3.After installing the 500W spindle motor, connect the motor wire to the adapter plate at the back
4.After connecting the conversion cable, connect the aviation plug and power supply to the governor box
5.Connect the conversion cable to the main control box, and connect the 2-PIN terminal cable to the lower part of the screen
