¶ Introduction
The TTC6050 (25) engraving machine is an upgraded version of the original TTC6050. It has been improved with optimized wiring for adapter boards and an upgraded mainboard.
¶ Mechanical structure
The three-axis of TTC6050 is driven by ball screws and guide rails, which offers higher transmission efficiency and accuracy, as well as greater structural rigidity. This is the foundation of work efficiency.
|
¶ Carving tools
The standard spindle of TTC6050 is a 500W spindle motor. The higher rotational speed can meet the basic conditions for efficient operation. It can also be used with a trimming machine for engraving. TTC6050 also supports the use of laser mode and can be upgraded with a 20W laser kit for laser engraving work.
¶ Electrical section
The control box of TTC6050 integrates a 500W spindle speed controller, the emergency stop switch of the spindle and the emergency stop switch of the machine. This facilitates the controllable operation of the machine during use. The protection mechanism of the infrared beam sensor can prevent the risk of accidental touch during the engraving process. This function can be turned on and off on the screen.
