¶ 使用前准备
本教程详细讲解TTC450Ultra雕刻机执行雕刻作业前的标准准备工作流程
¶ 通电
- 将机器附带的电源线接入控制盒，然后打开开关，检查控制盒顶部的红色急停开关是否打开，主轴调速旋钮是否调节到最大值
¶ Fix the workpiece
1.First, screw the screws into the sheet metal and the butterfly nuts
|
2.Then press it onto the workpiece that needs to be engraved
|
¶ Install the milling cutter
1.Insert the chuck into the nut, and then screw a portion onto the rotating shaft.
2.Then, after placing the milling cutter into the chuck, use a wrench to tighten the nut
