The parameter table uses hard oak board as a test reference, if other materials need to be used, and the hardness is not as high as hard oak board, some parameters can be adjusted appropriately, and the choice of tools can also be changed according to the actual use of the environment
| TTC450-775Principal axis | ||||||||
|---|---|---|---|---|---|---|---|---|
| category | material | Tool type | Tool diameter | Spindle speed | Depth of cut | Line advance | Feed rate | Rate of downcutting |
| plank | Oak | Single-edge spiral milling cutter | 3.175mm | 8000 | 0.4mm | 1.1mm | 800mm/min | 400mm/min |
| plank | Oak | Double edge straight groove milling cutter | 3.175mm | 8000 | 0.4mm | 1.1mm | 800mm/min | 400mm/min |
| plank | Oak | Three-point spiral milling cutter | 3.175mm | 8000 | 0.5mm | 1.1mm | 800mm/min | 400mm/min |
| plank | Oak | Single-edge spiral milling cutter | 4mm | 8000 | 0.4mm | 1.4mm | 800mm/min | 400mm/min |
| plank | Oak | Double edge straight groove milling cutter | 4mm | 8000 | 0.6mm | 1.6mm | 800mm/min | 400mm/min |
| plank | Oak | Three-point spiral milling cutter | 4mm | 8000 | 0.4mm | 1.6mm | 800mm/min | 400mm/min |
| plank | Oak | Four-point spiral milling cutter | 4mm | 8000 | 0.5mm | 1.6mm | 800mm/min | 400mm/min |
| plank | Oak | Single-edge spiral milling cutter | 6mm | 8000 | 0.4mm | 1.8mm | 800mm/min | 400mm/min |
| plank | Oak | Double edge straight groove milling cutter | 6mm | 8000 | 0.5mm | 1.5mm | 800mm/min | 400mm/min |
| plank | Oak | Three-point spiral milling cutter | 6mm | 8000 | 0.5mm | 2.4mm | 800mm/min | 400mm/min |
| plank | Oak | Four-point spiral milling cutter | 6mm | 8000 | 0.4mm | 1.8mm | 800mm/min | 400mm/min |
| TTC450-500WPrincipal axis | ||||||||
|---|---|---|---|---|---|---|---|---|
| category | material | Tool type | Tool diameter | Spindle speed | Depth of cut | Line advance | Feed rate | Rate of downcutting |
| plank | Oak | Single-edge spiral milling cutter | 3.175mm | 12000 | 1.2mm | 1.1mm | 800mm/min | 400mm/min |
| plank | Oak | Double edge straight groove milling cutter | 3.175mm | 12000 | 1mm | 1.1mm | 800mm/min | 400mm/min |
| plank | Oak | Three-point spiral milling cutter | 3.175mm | 12000 | 0.8mm | 1.1mm | 800mm/min | 400mm/min |
| plank | Oak | Single-edge spiral milling cutter | 4mm | 12000 | 1mm | 1.6mm | 800mm/min | 400mm/min |
| plank | Oak | Double edge straight groove milling cutter | 4mm | 12000 | 1.2mm | 1.2mm | 800mm/min | 400mm/min |
| plank | Oak | Three-point spiral milling cutter | 4mm | 12000 | 1.4mm | 1.4mm | 800mm/min | 400mm/min |
| plank | Oak | Four-point spiral milling cutter | 4mm | 12000 | 0.7mm | 1.2mm | 800mm/min | 400mm/min |
| plank | Oak | Single-edge spiral milling cutter | 6mm | 12000 | 1.2mm | 1.5mm | 800mm/min | 400mm/min |
| plank | Oak | Double edge straight groove milling cutter | 6mm | 12000 | 1.2mm | 1.2mm | 800mm/min | 400mm/min |
| plank | Oak | Three-point spiral milling cutter | 6mm | 12000 | 1.4mm | 1.5mm | 800mm/min | 400mm/min |
| plank | Oak | Four-point spiral milling cutter | 6mm | 12000 | 1mm | 1.5mm | 800mm/min | 400mm/min |