Find the Prusa software package in the USB flash drive (also available on the official website) and install it. Please select the software installation package corresponding to your computer system.
In the USB flash drive data, find the folder ”Prusa config”, which contains the sliced Cura-End G-code and Cura-Start G-code. After opening the Prusa software, go to printer Settings, then select Custom G-code and change the start G-code and end G-code to the corresponding code.
Configuration import ：
The file provides 6 kinds of height parameters, of which 0.2 height contains standard parameters and fine parameters. You can select the appropriate parameters to import according to your needs, and then start slicing printing. After slicing is complete, please copy the file to the USB flash drive, and then insert it into the USB port of the machine for printing.
Find the Cura software installation package in the USB flash drive (you can also download it from the official website), and then install it. Please select the software installation package corresponding to your computer system.
In the USB flash drive data, find the folder ”Cura config”, which contains the sliced cura-end G-code and cura-start G-code. After opening the Cura software, go to the printer Settings and change the start-G-code and end-G-code to the corresponding codes.
Configuration import
The file provides 6 kinds of height parameters, of which 0.2 height contains standard parameters and fine parameters. You can select the appropriate parameters to import according to your needs, and then start slicing printing. After slicing is complete, please copy the file to the USB flash drive, and then insert it into the USB port of the machine for printing.
Find the OrcaSlicer software installation package in your USB drive (you can also download it from the official website) and proceed with the installation. Please make sure to select the software installation package that corresponds to your computer system. The same process applies to importing configurations for Bambu Handy.
Configuration import
a. Open the software, enter the interface of selecting the printer, select ”Generic KlipperPrinter”, and then confirm to complete.
b. Select File → Import → Import Presets. Process configuration, consumables configuration and machine configuration can be imported respectively. Then start your slice printing. After slicing is complete, please copy the file to the USB flash drive, and then insert it into the USB port of the machine for printing.
