¶ Import configuration file
¶ Install the driver
- Driver name: CH340SER.EXE
- Where is this program?
- 1、The TF card provided by the manufacturer.
- 2、Open the browser and search for: CH340SER
- CH340 Official Website
- Note: Failure to install the driver program will result in the computer being unable to connect to the machine. The driver files for Windows and MAC are different.
¶ Install the software
- Select the laser software that needs to be installed in the TF card.
|
¶ Import configuration file
1.LaserGRBL：This software does not require the import of configuration files. It can be used as soon as it is connected.
- 1.Select the corresponding COM port
- 2.Set the baud rate to 11520
- 3.Click the link to proceed.
|
2.LightBurn
Step 1
Follow the sequence numbers in the figure to perform the operations.
- 1.Select the corresponding COM port software and you will know that the connection has been established with the machine.
- 2.Click on “Import Configuration for Device”
- 3.Click “Import”
|
Step 2
Follow the sequence numbers in the figure to perform the operations.
- 1.Locate the configuration folder of the corresponding software in the backup TF card data.
- 2.Select the appropriate configuration file
- 3.Click to open
|
Step 3
Follow the sequence numbers in the figure to perform the operations.
- 1.Click on the machine configuration after the import operation.
- 2.Click “OK” to apply
|
步骤4
Follow the sequence numbers in the figure to perform the operations.
- 1.Click on the macro in the operation bar
- 2.Just check the macro instructions in the column.
|